Home > Bike Types > Mountain Bike

Waltworks Offering 36’er Lightweight Mountain Bike Tire

14 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Waltworks 36er lightweight mountain bike tire

So far, 36″ wheeled bikes have been largely a tradeshow gimmick or unicycle option. But for the select few that take them to the trail, Waltworks has a higher performance tire headed this way.

Made for them by Vee Rubber, the 36×2.25 tire has a tread pattern that’s “Kenda Nevegal and Schwalbe Racing Ralph” with tapered, ramped center knobs and tie-bars connecting the triangular side knobs for smooth cornering transitions. In other words, it’s a well thought out tire, and it comes in almost a full pound lighter than anything they’d used before.

It’s a wire bead, but can be set up tubeless at pressures as low as 18psi (65psi max). Claimed weight is 1540g (+/-40g) and they’ll retail for $125. Available for pre-order now, they should ship in November.

Thank to Matt for the tip!

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

14 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
mikelikebike
mikelikebike
11 years ago

sweet….expensive rubber that handles horribly…im sold….

bbb
bbb
11 years ago

cool. Id love to try one of these

Jason
11 years ago

whatevs, not until they make one in a fat bike version will I even think about it

Topmounter
Topmounter
11 years ago

I’d definitely like to add a 36’er to my stable.

MZUNGU
MZUNGU
11 years ago

Why bother, I am going to wait for my 46’er. They said it’ll roll over them rocks even better.

Speedy
Speedy
11 years ago

Next up – Fat Bike 36″ tires.

Dan
Dan
11 years ago

LOL braking power GONE! seriously that inerta that these tire/wheels are going to have is going to me mind blowing! poor poor disc rotors……

satisFACTORYrider
satisFACTORYrider
11 years ago

do 36ers come with lil red noses like 29ers first did?

Josh
11 years ago

some people ride bikes because its fun… these are fun bike why all the hate?

MB
MB
11 years ago

@Josh – BINGO!! Puts a smile on my face every time I ride my 36er.

@Dan – I’m 235lbs, and ride mine with 185 rotors front and back with BB7s and surprisingly they stop great. Someone did a dual rotor set of hubs for his and it was WAY overkill.

Ben W
11 years ago

Yeah, haters always going to hate. Why are people so against trying something different? These things have been around awhile too. @MB, I saw a guy at the 24 Hours of Old Pueblo in February with the dual front rotor setup. It seemed like overkill.

Mindless
Mindless
11 years ago

Dan, learn physics a bit. Most work is done to stop your fat ass, not the wheel inertia. Now the leverage is some 20% higher, so you would better use a size up rotor. Some 203mm with an aluminum carrier will work just fine in the front.

steve
steve
11 years ago

I rode a Coker 36er years ago – one of the crappiest bikes I’ve ridden, but I’ve rarely ridden anything that was so much fun. I’d love to see better tires and a bit of modest 36er production. Braking, even on the Coker, wasn’t terribly bad. As people point out the mass in the wheelset is only a small fraction of the total moving mass. Inertia mass of the wheelset is an issue for acceleration and that is true in steering. Lighter wheelsets would make these handle much better.

Nagib
Nagib
8 years ago

Hello,

How much does it coast the bike inch 36 ?

Regards

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.