Home > Bike Types > Mountain Bike

Aaron Gwin Discusses Mechanical Failure During his World Championship DH Race Run

12 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Aaron Gwin has been a dominating force in downhill mountain biking over the past two seasons. He became the first American ever to win the World Overall Cup in his third season racing pro last year and clinched the overall again this year. In those two meteoric years of success he has failed to earn that elusive cherry on top – a win in the World Championship.

Last year, on an dreary mud filled course, Danny Hart had the ride of his life. This year, with Greg Minaar in the hot seat, Gwiny was the last rider at the top of the mountain. Shortly into his run down the three minute + course he suffered a mechanical and crashed.

What happened? Head past the break for the official word. 

“At the World Championships there is no qualifying round or seeding run, but a timed practice session where riders can check their general race speed against official timing. Aaron was happy with his 4th in timed practice and as race day drew nearer, and the sun came out drying the track dramatically, all was set for a classic Aaron Gwin run. Unfortunately the brake failure, something he has never experienced before and in fact is his first mechanical in a race run since joining the team, really took him by surprise.

Aaron said at the finish line – “I really don’t understand what happened. I warmed up as usual, tested the brakes as usual at the top, walked down the course to have a look at how the track was running, went into my run, brakes working fine for the first minute or so, and then bang, nothing. I crashed and got up as soon as I could, pumped to see what was there, but it wasn’t enough, and knew my day was run”.

The brakes have been taken back to Japan for further analysis as there was nothing immediately evident from the post-race inspection, and nothing new was done to these brakes that Aaron and the team has run for most of the season.” –   Trek World Racing

Word on the street is that Aaron was running prototype Shimano Saint brakes. He had been offered a set of production stoppers when they became available, but chose to stick with the prototypes because he preferred the feel.

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
MulletRacer
MulletRacer
11 years ago

Boiling fluid?
Leaky fitting and loss of pressure?
Air bubble trapped in the caliper entered the lines?

Scary stuff regardless

scott
11 years ago

What could it be, it’s a mirage
You’re scheming on a thing, that’s sabotage-Beastie Boys know what happened!

satisFACTORYrider
satisFACTORYrider
11 years ago

austrian trail gnomes. sneaky bastards. @ scott – nice shout out for mca!

Joshua Murdock
11 years ago

Scott wins… there’s nothing left to say.

Steve M
Steve M
11 years ago

Dude uses brakes?

Thomas
Thomas
11 years ago

Word is BOTH brakes failed simultaneously. Super super weird.

satisFACTORYrider
satisFACTORYrider
11 years ago

it would be better if someone would just ask Monk.

Mindless
Mindless
11 years ago

Ummm.. Prototype? Failed? Who knew..

Ben
Ben
11 years ago

Happened to a friend about ten years ago with another manufacturer’s brakes in Les Gets. He was riding a Scott Scholarship DH bike, on his last run of the fortnight. Scott recalled all of the brakes on the Scholarship bikes as a result – the manufacturer did not act when told (and despite plenty of people asking about similar failures on its own forums).

Dan
Dan
11 years ago

@Mindless, that’s their job to test stuff sometimes bad things happen. And those bad things are Aussie trail gnomes like satisFACTORYrider said. Ha

efukt
efukt
11 years ago

Sabotage by Canadians!

don
don
10 years ago

I had this happen yesterday with avid elixers, as a result I now have 2 bones in my knee broken and will be out of commission for a few months

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.