Home > Reviews > Clothes & Gear Reviews

Review: Niterider Pro 3000 – An Insanely Bright Bike Light

NiteRider Pro 3000 lumen mountain bike light review and weights
14 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

NiteRider Pro 3000 lumen mountain bike light review and weights

Last year, Niterider bumped their top of the line dual light system from 1400 to 3000 lumens, essentially doubling the output of any other major U.S. brand.

We’ve been testing one out since just before daylight savings time kicked in this winter and it’s been pretty awesome. Prior to that, we had put a fair number of night time miles on the 1400. In addition to the light output, the new model improves the beam pattern considerably.

Read on for the full review, tech specs and weights…

WHAT’S IN THE BOX?

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

The kit includes:

  • Light head unit
  • Battery
  • Battery Mount
  • Charger
  • Extension cable
  • USB cable
  • Helmet & handlebar mounts
  • Sticker
  • Instructions
  • Canvas zippered carry case

It comes bundled nicely all in the canvas case, and you will never, ever get it all back in there the same again. But that’s fine. Other than traveling to overnight races, there’s not much need to pack the charger up with you.

ACTUAL WEIGHTS:

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

From left to right: Battery (457g) – Light (193g) – Battery Mount (125g)

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

Handlebar Mount (68g) – Helmet Mount (45g) – Extension Cable (42g)

The light comes out of the box preset to run three settings plus a flashing mode. They are:

  • 750 lumens (6 hour run time)
  • 1,500 lumens (3 hour run time)
  • 3,000 lumens (1.5 hour run time)

The on/off switch toggles between them, always starting at the lowest setting. Hold it for a couple seconds to turn the lights off. To turn on flashing mode, hold the button down for about three seconds.

One of the unique features to NiteRider is their DIY software. For PC’s only (sorry Mac users), it lets you create four more Programs, and in each Program you can customize the three settings. This gives you five possible Programs on the light at any time. The software uses simple sliders to show the tradeoff between lumens and battery life, letting you adjust each bulb in 50 lumen increments. So, if you know a race course requires about two hours of night riding, you could maximize brightness to last two hours, setting it around 2,000 total lumens or so. Go crazy.

Since our office is Mac only, we left it running with the stock program only and, honestly, it worked out fine for normal use.

USE & REVIEW:

NiteRider Pro 1400 lumen mountain bike light review and weights and beam pattern

Perhaps the biggest upgrade from the Pro 1400 (above) is the move to three individual Cree LED lights per reflector, for a total of six bulbs. The Pro 1400 had just two, one per side. The other distinct difference is the reflector cones. The 1400 had an obvious flood and spot. The 3000 has two reflector cones that look identical and seem to split the difference between a flood and spot.

On the trail, the new reflectors vastly improve the beam pattern quality. With the 1400, the spot put a bit too much light right in the center with a very small point, and the flood put most of the light at the outer circumference. Together they gave a decent light pattern, but it was still narrower than the Light & Motion SECA 1400 we reviewed.

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

While we’re comparing, because we know you are, too, the NiteRider system uses a much larger, heavier battery than the Seca, and it requires the battery be slid into a separate mount. So, you have light + cable + battery mount + battery.

By contrast, the Seca’s light has one cable and plugs directly into the battery, and the cables plug in a bit easier.

The Seca still has a slightly broader, perhaps infinitesimally better beam pattern, but the Pro 3000’s massive light output makes that a non issue. Last bit of comparison: Both brands’  helmet mounts are very secure and do a great job. The Seca’s allows for simpler angle adjustments.

You might be thinking, “Sounds like you like the Seca better.” For ease of set up, yes. But that’s only the four or five minutes before the ride. Once you’re riding, other than the systems’ weight differences, all that becomes irrelevant. And that’s where the Pro 3000 starts pulling ahead.

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

The raised on/off switch makes operation easy, even with full finger winter gloves. The lights on top show remaining battery charge when on. They also provide a visual indicator of which program the light is set on, which we’ll cover in a minute.

To adjust the angle of the light, you lift the tab at the rear and slide it up or down on the mount. The handlebar mount has just one position, you adjust the angle by rotating the mount around your bar.

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

The helmet mount uses simple cams to lock the straps into place. They hold really well and are plenty long enough to work with just about any vent layout your lid may have. Even better, there’s no velcro to get stuck to the pads, so they slide into the place easily. The design does put the light a good bit off the helmet, but we haven’t caught it on any low branches yet.

The handlebar mount threads around your bar (OS or regular) with a large, easy to turn plastic nut.

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern
It would be nice if the battery unit was one piece, as it would save weight and simplify things. The mount could be separate for putting it on your frame, but we suspect most riders (mountain bikers, anyway) will simply run it in their jersey pocket or hydration pack. Speaking of which, the extension cable is long enough to run it inside your jersey, out the bottom and up and around to your jersey pocket. But, the battery’s pretty heavy for aggressive riding like that. We’d recommend a hydration pack if total rider weight isn’t at an absolute premium.

BEAM PATTERN & BRIGHTNESS

With any light, how your camera spits out night imagery using time lapse is largely dependent on how it process the input and creates the file. These images show the three toggle positions using the stock Program out of the box:

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

750 lumens (one push)

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

1500 lumens (two pushes)

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern

3,000 lumens (three pushes)

Are these accurate? More or less, I’d say they do a pretty good job representing what my eyes see on the trail. They’re probably just a bit on the bright side, but they do accurately reflect how far down the trail you can see. On the bottom photo, the thicker tree flanked by a thinner tree on either side directly in the center of the trail is about 120 feet away (36.5 meters).

This video is a bit darker than what we experience in person, but it gives a good idea of how much of a difference there is between the various light outputs:

OVERVIEW:

We’ve ridden the Pro 3000 on rides usually lasting about 2.5 hours. These rides use a mix of settings, but most of the time is spent in the 1500 and 3000 lumen settings. Putting it back on the charger afterward usually shows one bar left, meaning we’ve run through about 80% of the battery. To us, this indicates you could get a solid three hour ride in with judicious use of the max setting.

NiteRider Pro 3000 lumen mountain bike light review and weights and beam pattern
The docking station shows what's connected and how much charge the battery has so you know when you can get away with snagging it. It hooks to your PC via USB, and the headlamp plugs into it to upload new Programs.

Quite honestly, unless you put it on the max setting right out of the gate, 1500 is plenty for fast, race-intensity riding. That said, 3000 is A. Maze. Ing. It makes the 1400 lumen lights we’ve tested and even the 1500 setting seem dull and dreary. Turning it on is like when you first saw the Cateye HID Stadium light and your jaw hit the dirt. Even with someone riding behind you, its light swallows your shadow. It’s simply ridiculous how bright it is. And yet, once you’ve ridden with it, it’s hard to contemplate riding with anything less.

Our test rides have included 90+ minutes in a light rain, temps between 32º and 36º F and some nice, warm rides, too. The light worked flawlessly in all conditions we’ve encountered. And, while testing the 1400, it sat on our pit table at the BURN 24 Hour and was covered in dew between laps. It still works just fine.

Do you need 3000 lumens to have a good ride? No. Do you want 3000 lumens? Abso-freakin-lutely.

Options: Given that half or more of our riding time was on the 1500 setting, the Pro 1500 is a solid option for those on a budget, and they have two versions of that. Here’s pricing:

  • Pro 3000 – $699.99 (8-cell battery, DIY software, docking station)
  • Pro 1500 – $549.99 (6-cell battery, DIY software, docking station)
  • Pro 1500 Race – $349.99 (4-cell battery, no DIY, etc.)
Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

14 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Oderus
Oderus
12 years ago

Where in the hell does anybody ride that they need 3000 lumens?

gfurry
12 years ago

No Mac software. No biz from me. What is this 1995?

Pswag115
Pswag115
12 years ago

A mac that does not dual boot? What is this 1995?

Scott
Scott
12 years ago

I paid $$$ for a Nite Rider MiNewt for a specific race. Bought it, used it and it worked great. Then I left it in my bike accoutrements section for the next time I needed it. When I pulled it out again it wouldn’t take a charge and I was told that I had not maintained the battery properly and it had dried up. A replacement battery was about 75% of the original price. I will not buy another Night Rider product.

Steve
Steve
12 years ago

@ Oderus

In 5 years this is going to be considered normal light investment for mountain biking…

Greg
Greg
12 years ago

Hope so. What I’ve read is that they are running up against some physical barriers with making lights brighter.

How hot does this thing run?

Tyler
Tyler
12 years ago

Greg, good question. When reaching up to change settings, the bottom of e light can get pretty warm at the heat sinks, but with full finger gloves on it takes a second to register. Probably ot anything you’d want to touch with bare fingers for very long, but certainly not anything that caused alarm.

tirider1
tirider1
12 years ago

I have last years Pro700 it has worked flawlessly and which uses the same battery “tray” deal, it might be a bit of weight gain, but in the past when the cable was yanked out of the battery it was a hefty price to pay as for now the tray cost about $20.00.

MTB
MTB
12 years ago

Tyler,
Dumb question. Does the light have a sensor so that when you’re not riding (less cooling), the light gets hot and automatically moves down to lower lumen, or does it stay at 3000 lumen -/+ riding.

Chris
Chris
12 years ago

Tyler, you’re welcome to join us up here in the mountains with it, if you haven’t already — I find that I catch my Pro700 on a few tree limbs here and there. Also, a weird thing: Sometimes if I hit it just right, a limb will push the top button and drop me down a light level. Not so fun when bombing Trace or Pilot …

One thing you didn’t mention was the interchangeability of the Pro battery system — the 8-, 6- and 4-cell batteries work across all “Pro” models, which is awesome if you have a backup battery and/or are riding with friends who also have them. It does away with all the different (confusing) battery options they had for their top-end HIDs in the past. The battery tray, while not the most elegant solution, is quite a bit better than the old style connectors they had, which usually meant pulled-out internals after a half-season of use or so.

And MTB, my Pro700 does indeed step down when it gets hot, eventually to shut off — my guess is the new ones do too? Tyler, please confirm?

Robin
Robin
12 years ago

There’s certainly a sensor somewhere if the unit decreases light output when internal temperatures reach a given level, otherwise about the only way to decrease the light level would be to let the unit fail.

Luke
Luke
12 years ago

I’ve been using one of these since October. It’s overkill, but I love it 🙂 Like the article says, you don’t need it, but you want it. If you can afford it, you’ll enjoy it. Sure, I can ride almost as fast/confidently with my 900 lumen light, but being able to see absolutely everything is awesome.

I don’t like the weight/size of any big light on my helmet, so I use it with a 600 lumen NiteRider all-in-one light. The 600 is pointed down to illuminate the 2 feet in front of my bars and I leave it on for most of the ride, including the stops, sometimes at the 350 lumen setting for longer rides.

The 3000 is mounted on my bars and aimed so that its pool of light begins where the 600 ends. In this configuration I can see as far down the trail as I could in the daylight – it really encourages me to look ahead! I power it up into the 3000 lumen mode at the beginning of each segment of trail, and turn it off when we stop. Using it like this, I’ve yet to drin the battery, as our rides don’t generally exceed an hour and a half of riding time. As it’s on my bars, I can easily monitor the eight level battery indictar.

I’ve also used it when commuting, although I prefer the convenience of my 600. Cars never cut me off, as sometimes happens when I’m running a weaker light . . .

The battery tray gives great flexibilty, I’m looking forward to getting a second battery or system so that I can run full power for longer. Heat has yet to be an issue, even when stopped.

Overall, I’m thrilled with this light! Definitely worth what I paid for it.

As an aside, I think that Steve is right. 3000 lumens is super bright, but brighter lights will continue to be made, and it won’t be long until most people you ride with are using 1500-3000 lumens. Then we’ll be talking about whether anyone really needs 10,000 lumens 😛

JP
JP
11 years ago

Shuts off when going over anything but small bumps, which is extremely dangerous since you can’t see anything at that point until you take one hand off bars to turn back on. I wouldn’t recommend this light to anyone unless they have a death wish or ride like a grandma.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.