Home > Bike Types > Mountain Bike

Roc d’Azur Sightings – Skyde Titanium Bikes, AeroZenith Carbon Wheels & Lightweight Goodies by FRM

Skyde titanium road and mountain bikes
2 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Skyde titanium road and mountain bikes

Roc d’Azur’s expo is probably only second to Sea Otter Classic’s in size and scope, which gave me plenty to snap photos of and catch a few things we missed from Eurobike and Interbike.

Skyde is a small French titanium frame builder that makes everything from road to mountain to cyclocross to commuter and touring bikes. Above, an internal gear hub bed belt drive mountain bike that used a miniature looking S&S coupler on the seat stay to break the frame open for the belt.

His bikes were rolling on carbon aeroZenith wheels, which were rather unique. All that and some pretty trick upgrades and ideas from FRM past the break…

Skyde titanium road and mountain bikes

The shaped down tube provides fork crown clearance so you don’t, uh, dent your frame. This is (likely) the same reason Moots has redesigned all of their top tubes with a curve for 2012.

Skyde titanium road and mountain bikes

Nice integrated post mounts for the rear brake.

Skyde titanium road and mountain bikes

His road bike was overall very pretty, as most titanium bikes are (to me, anyway), but the hourglass head tube with internal headset was simply gorgeous. Nice internal cable routing for both Di2 and brakes, too.

AEROZENITH CARBON WHEELS

aeroZenith carbon fiber road bike wheels with offset full carbon rims

AeroZenith is a French carbon fiber wheel manufacturer. They use a mix of UD and woven carbon fiber fabrics with aerospace resins to manufacture all of their own parts in house.

aeroZenith carbon fiber road bike wheels with offset full carbon rims

Besides the full carbon construction, what really jumps out is the asymmetric rim profile. The non drive side on the rear is relatively flat, while the drive side has a deeper, curved section. Since the front rim is symmetric, we’re guessing this is to have a more even dish on the spokes. Their website doesn’t mention that, but does say the design reduces sensitivity to cross winds while being very light, rigid and durable. Product pages weren’t working when we checked, so we don’t have weights, but here’s a translated link describing their production process.

aeroZenith carbon fiber road bike wheels with offset full carbon rims

FRM COMPONENTS

FRM Urano 29er XC Team lightweight mountain bike wheelset

FRM had a number of trick lightweight components. Not all of these are brand new, but they’re items we hadn’t seen before. Above is the Urano XC Team 29er wheel set that comes in at just 1,400g for the pair.

FRM Urano 29er XC Team lightweight mountain bike wheelset

The free hub body is very chiseled – the splines are about half what you typically find on most hubs. The rim was super shallow and had the weld left intact (as opposed to filed smooth) opposite the valve stem hole to counter balance the weight.

FRM Urano 26 inch XC Team lightweight mountain bike wheelset

The 26″ Urano XC Team wheel set tips the scales at just 1,215g. Both should be tubeless ready with rim tape and sealant.

FRM Urano team subset with integrated rotor mount lockring and no rotor bolts

What’s most interesting about the wheels are the Urano Team hubs. Rather than a traditional 6-bolt mounting flange, FRM built the rotor mounts directly into the flange…

FRM Urano team subset with integrated rotor mount lockring and no rotor bolts

… and use a lockring to hold it in place. Claimed weight savings over a 6-bolt design (which would require a beefier flange to hold the threads plus the bolts) is 25g.

FRM Urano team subset with integrated rotor mount lockring and no rotor bolts

They’re available in these colors, too, with QR, 15mm, 20mm and Lefty front axles and QR and 12×142 rear axle options. Weights range from 109g to 225g (w/o lockring or skewer/axle).

FRM chainring and crankset options for 2x10 and 3x10

They offer a number of lightweight chainrings for normal BCDs in both 2×10 and triples along with X-Glide compatible 2×10 rings for SRAM’s X0 cranks. The latter should give you more options for costomizing your gearing choices.

FRM 36 tooth cassette cog conversion kit

On the left, their 36T cog lets you slide in a much larger gear on the back of your cassette, then lose the 11T small cog, changing up your gears from an 11-32 to 12-36. On the right, they make a wide range of bottom bracket adapters for standard, press fit and bb30.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

2 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
mkrs
mkrs
12 years ago

That 6-hole rotor mount is ignenious, I must say… Pretty awesome stuff!

Ben G
Ben G
12 years ago

Pretty cool 6 bolt design, seems like a centerlock 6 bolt hybrid. Don’t think I’d roll with it though, I’ll let the weight weenies find out if it works before I stick my fat self on top of it. I like the idea of balancing the rim using the weld.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.