Home > Bike Types > Mountain Bike

Commencal Launches All-New Meta AM Trail Bike, More Coming

9 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

20110720-011624.jpg

The new 2012 Meta AM brings modern standards to their all-mountain Meta line. The frame is completely new and gets the 142×12 rear thru axle, a pressfit BB92 and internal cable routing.

The biggest change is that it moves to their floating shock design from the Supreme DH V3. The benefit is that it removes the direct stress from the downtube, so they can reduce the thickness of the tubes and reduce weight. It also let them get the shock curves they wanted. The new bike is a little more progressive than the Meta 5.5, and it builds in some pedaling efficiency.

The main pivot position is optimized for 2×10, done intentionally because the difference between the two chainrings is much smaller than the range on a 3×10, which made it easier to tune the suspension to perform well across all gears.

20110720-011744.jpg

The redesign also let them improve the seat tube angle. The old design had such a slack angle that people running tall seatposts ended up with the saddle too far over the rear wheel.

20110720-011840.jpg

20110720-011902.jpg

The chainstay is 5mm longer, too, which Commencal’s design engineer Nico Menard says improves traction when climbing.

Despite the oversized look of the rear, they left out a seatstay bridge at the top so the bike wouldn’t be too stiff. But, too keep it stiff enough, they went with the 142×12 Maxle rear axle and large one-piece pivot axles that are threaded directly into the frame. This also prevents over torquing the pivot bolts and creating tension.

20110720-011944.jpg

The tapered head tube is designed to work with Cane Creek’s AngleSet, but it comes stock with a normal headset.

Brakes are post mount with 180mm front and rear.

20110720-012201.jpg

20110720-012213.jpg

Three spec versions will be available at retail, ranging from about $3,500 up to $5,500. A frameset will also be available.

Travel is 150mm front and rear, putting just above the 5.5’s 140mm travel. Going forward, this bike replaces the 5.5 at the high end, but they’ll keep a low end 5.5 as a price point bike.

Near the end of the year, they’ll have a new 160mm Meta SX that replaces Meta 6.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

9 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Sevo
Sevo
12 years ago

Frame weight?

brumos
brumos
12 years ago

That is some butt ugly internal cable execution. Seems more like an afterthought.

oilcanracer
12 years ago

ummm….longer chainstays = less traction for climbing…….:(

ringding
ringding
12 years ago

I’m with you Brumos….overall the bike has some nice cue’s to it, but I’m not a fan of how they did the routing along with how open the ports are. Hopefully they have a grommet to cover the space the cable doesn’t occupy to keep dirt and grit out.

Jake
Jake
12 years ago

They left a seatstay brace out because it’s too stiff? Man, that’s the dumbest thing I’ve ever heard.

staike
staike
12 years ago

@brumos: To me it looks like really well planned. With more and more people getting dropperposts, it looks like a very nice and clean cable routing for that as well.

devilish_dwarf
devilish_dwarf
12 years ago

same here…
really ugly internal cables routing and lack of the seatstay bridge on the brand new bike are really not undersandable.

…and how, the f*, fs all mountain bike can be laterally too stiff??

Matt
Matt
12 years ago

Longer chainstays, make it so you can more effectively climb in the saddle because you are less likely to loop out when going up steep hills. with the longer rear end you can drive the rear wheel harder into the ground, improving traction.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.