Home > Clothing-Gear-Tools

The Casual Clipless SPD Shoe Review: Mission Workshop’s Rondel vs. Chrome’s Kursk Pro

Rondel_vs_Kursk_Pro
8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Rondel_vs_Kursk_Pro

Let me start by stating that I hate toe cages and straps.  However, I also hate changing my shoes when I get to work.  I have been keeping my eye out for just the right shoe that can do it all.  A shoe that allows me to clip in on my commutes, but is also comfortable enough to wear around the office all day long.  This search ended with two pair of shoes in my possession.  The first being the Mission Workshops Rondel, and the second being the Chrome Kursk Pro.  I have been wearing both for a few months now, and past the break you will find out just how they perform on and off the bike.

Mission_Workshop_Rondel_Bottom_and_Front

The Contenders:

The Mission Workshop Rondel was a limited edition shoe made for the shop by DZR.  While there are only a few size 47’s left, I am continuing on with this review because this shoe is very similar to others by DZR.  All the DZR shoes run a very similar (if not exactly the same) sole, and should be very comparable to the Rondel.  With that said, the Rondel has a full-grain leather upper that has worn in nicely.  The laces, while ridiculously long, can be tucked under a piece of elastic at the base of the tongue.  Around the back there is a 600 luminosity reflective heel badge for night visibility.  Underneath you will find the DZR sole.  There is a standard two-bolt cleat mount with the same adjustability you would find on any mountain shoe, and hidden beneath that rubber is a variable-flex nylon inner shank to aid in power transfer.  While the Rondel is only available in a size 47 for a reduced price of $80, you can have a similar DZR shoe (the District or GMT-8) for $85.

Chrome_Kursk_Pro_Bottom_and_Top

Chrome has been making cycling oriented shoes for a while now, and most recently they have created a SPD-compatible version of their popular Kursk shoe, called the Kursk Pro.  The upper is made of 1,000 denier Corduar, like many of their bags, and has a rubber toe.  The shoe has a low profile design. Midway down the tongue you will find an elastic band to keep the laces out of your chain.  On the flip side, the shoe has a bright red sole with a two-bolt cleat mount.  The sole on the Kursk Pro contains a full length nylon plate to keep the power moving through to the road.  Note: the non SPD Kursk only has a 3/4 length nylon shank midsole. The Kursk Pro is designed with a built-in fore foot rocker for added comfort and ease of walking.  The Kursk Pro from Chrome runs $95.

Mission_Workshop_Rondel_Sole_and_Cleat

Cleat Set Up:

The section of rubber above the cleat mount on the Rondel was scored, but not perforated.  I had to use a utility knife to cut out the rubber patch, and to be honest, it was pretty hard to remove.  It took me the better part of 20 minutes to remove the section on both shoes, and bolt up cleats.  Once on, I had to move the cleats back almost all the way, as well as push them all the way over to one side so the shoe so it didn’t rub on the crank arm.

Chrome_Kursk_Pro_Cleat

The Kursk Pro’s came with the rubber patch already off, and a replacement section bolted on in its place (incase you don’t want to install cleats).  Setting up my Crank Brothers cleats on the Kursk Pro’s was very simple.  I removed two bolts, placed the cleat on the shoe, and replaced two bolts.  I was done in about five minutes for the pair.  As with the Rondel’s the cleats are pushed all the way out to one side, but they are in more of the middle of the adjust range fore and aft.

Mission_Workshop_Rondel_Clipped_In

Performance on the Bike:

When it comes to stiffness, the Rondel feels like a slightly stiffer street shoe.  It is not a go to shoe for a super long ride, but will do for a short commute to work.  With that being said, I put in 40 miles the other day on a Sunday Parkways ride with some friends and my feet were just fine at the end.  We had lots of stops along the way though, and without those I have a feeling my dogs would have been barking something fierce.  Clipping in is no problem, and with the cleats adjusted properly, I have no crank arm rub.

Chrome_Kursk_Pro_Clipped_In

The Kursk Pro’s are more akin to the mountain shoes they have replaced in my closet.  These things are definitely stiff.  On the bike they are great.  Leaving from a green light, the shoe really lets you transfer the power to the road.  I would have no problem grabbing these shoes and heading out for a 20 plus mile ride.

Mission_Workshop_Rondel_Logo

Performance Off the Bike:

On the bike, the Rondel is a good enough shoe.  It gets me through my daily commute no problem, and running errands around town is no trouble either.  Off the bike however, is really were this shoe shines.  The sole is flexible enough so that the shoe is comfortable to stay in all day.  While I am chained to a computer and off my feet most of the day at work, I have had success in wearing the Rondel for several hours walking around a trade show, or working on bikes at a friends house.  I even find that I myself wearing this shoe out when I am not taking the bike.  I don’t find that the shoe as any heel slip, and the sole is flexible enough to allow for all day comfort.  When walking, I do find that the cleat rubs the ground a bit on concrete, blacktop, or other slightly uneven hard surfaces.  However, it isn’t very noticeable, and on carpet or other soft surfaces I don’t notice it at all.  And while the cleat does make contact on harder surfaces, it does not make the click clack sound like a road specific shoe would.  As far as sizing goes, the Rondel (and I assume other DZR models) run the same as my regular street shoe.  I ended up with an 11 (Euro 45).

Chrome_Kursk_Pro_Right_Side_Rear_Logo

While the Kursk Pro is great on the bike, its off the bike performance suffers a bit due to all that stiffness.  The problem I have run into is that the heel cup doesn’t seem to come up enough for my foot.  That, combined with the stiffness offered up by the full length nylon shaft, leads to the shoe slipping on the back of my heel.  As I take a step, about half way through the motion, where the sole should flex, it doesn’t, causing it to pull the heel down a bit.  I have a feeling the built-in foot rocker is supposed to elevate this slipping, but for me and my foot, it did not.  Your millage may very however, as there are many favorable reviews of this shoe on Chrome’s website.  It may just be that I have an oddly shaped foot.  Off the bike, I can run into the store for a few things, or lock the bike up and go grab some food, but I am simply not able to wear the Kursk Pro all day like I can with the Rondel.  The recessed cleat on the Kursk Pro does not hit the ground when walking, unlike the Rondel.  And as far as sizing goes, be forewarned that they run a bit on the large size.  After trying on a few different sizes, I ended up with a 10 1/2.  Others I know who own this shoe have reported needing one whole size smaller however.  My advise would be to find a shop that has them in stock so you can try them on first.

Conclusion:

In my search for that perfect, do-it-all shoe, I have found two good contenders.  Out of those two, the winner for me is the DZR made Rondel.  The off the bike performance is really want i need.  My commute is short enough that the lack of stiffness isn’t as big a deal to me.  For those with a longer commute, the Kursk Pro may be the way to go.  If the Kursk Pro heel cup came up just a bit more, I have a feeling it would be a much closer call.  Minus the heel slipping, I do like the shoe.  As luck would have it, Chrome is planning a version of their taller Midway with an SPD compatible sole, which should resolve my main complaint about the shoe.  If and when the Midway Pro becomes available, you can count on a review shortly their after.

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Chris
Chris
12 years ago

The Kursk Pro rubber tip goes “plop-plop” when I walk around.

I also have the same heel cup issue as the reviewer.

billy
billy
12 years ago

The Kursks break in and become super comfy. While the midsole remains stiff, the cushioning softens up, making them perfect all day shoes. I went with a 1/2 size smaller and am happy.

mtb shoe wearer
mtb shoe wearer
12 years ago

not having stiff soles has always been the problem with casual shoes, glad that they are finally making stiff forefoot/soles. feeling the relatively small pedal platform through your shoe is annoying and painful over time. that said, i still want an even stiffer sole, like a mid range mtb shoe, at the cost of looking like a clown.

Nick Burklow
12 years ago

@billy – how long was your break in period?

Steve
Steve
12 years ago

What does the comparison matter if the Rondels are no longer made? My understanding is that they were a one-off, with no intention of restocking. Am I mistaken?

Nick Burklow
12 years ago

@Steve the comparison is still valid. As I mention in the review, the rondel is very similar to other shoes made by DZR. And, in my opinion the uppers of shoes like this are not as important as the performance of the sole. The DZR sole is the same on all the shoes they make. One would expect another DZR shoe to preform and fit in a very similar manner to the Rondel.

Noban
Noban
12 years ago

Great review! This was exactly what i was looking for. I was comparing the Rondel with the regular Kursk and am glad that the Rondel came out on top because I was leaning towards it (maybe because it looks so much better). I just had a few questions: 1) does the shoe come with a rubber insert to protect the clamps/so it doesn’t make that clinking sound when walking on uneven hard surfaces? 2) would you recommend ordering this shoe in your regular street size? i wear 12.5’s, but they have 13’s available for sale on their website. Just wondering if going a little bigger will end up being a bad choice.. Thanks!

Mike Bike
Mike Bike
12 years ago

I bought the Kursk Pros and tried them with SPD cleats. FYI the cleat height is a tad thicker than the recessed area so it always grinds on the ground when walking, even with completely flat surfaces. Anyone know what the cleat thickness difference is between SPD and Crank Bros? I’ve always used SPD but want to have a shoe option I can actually wear around town. Also, yes I have some heal slip but it’s not a big deal so far. If I can eliminate cleat grinding I’ll be a happy commuter.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.