Home > Reviews

Long Term Review: Easton Haven 26″ UST Wheelset

13 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

As one of the more prevalent wheelsets out there today for trail/AM bikes, the Havens didn’t get to that point by having a lack of features. On paper, the Havens are some of the best wheels going, but what does that say for real world, long term use?

I initially jumped on a pair of the gold hoops shortly after they were first introduced. Between the two versions, they have found themselves on at least 4 bikes since, and are still on my XC/trail bike as we speak. The Havens do a lot of things incredibly well, but are they perfect?

Find out after the break!

First, the basics. The Easton Haven is a UST wheelset, with straight pull spokes, different hub compatibility and a lot of bling. The first generation was only offered in the shiny gold colorway with its jewelery like machined hub. The rims are a properly wide 26mm ext., 21mm int. width, which obviously are devoid of spoke holes to allow the UST moniker. Easton utilized a unique dual threaded nipple that threads into the rim and onto the spoke at the same time to allow for the non pierced rim. At the hub you will find the 24 (26 inch set) Sapim 2.0/1.7/2.0 spokes fitted to the hub through holes in the flanges secured by the spoke’s nail head design.

Havens are currently available in both 26 and 29 inch versions, and come in both gold and black colorways. Both are now 142 x 12/135 x 12 compatible, too.

easton haven wheels axle

One of the beautiful features of the current Easton Havens is the adaptability for nearly any hub design, although that wasn’t always the case. Easton’s first generation came with the 15mm thru axle front adapter pictured above right, but did not allow for a rear thru axle. This was due to the fact that the inside diameter of the rear bearings were physically too small for a 12mm axle to fit through. The issue was resolved on the subsequent model, and now all new Havens are both 142 x 12 and 135 x 12 compatible along with the standard 135mm quick release. The axle systems are incredibly easy to change out, and making hub adjustments is also incredibly easy which is a good thing (more on that later).

The Havens include their own UST valve core which is specially shaped to fit the center channel of the rim. While I haven’t tried it, my guess is a Shimano UST or Mavic UST core may work in a pinch. Fortunately, for the entire duration of testing on both wheels I never had an issue with the valve or the tubeless ability of the rim for that matter. The Havens allow for use of UST tires without sealant, tubeless ready tires with sealant, and even some non-tubeless tires to be run tubeless with sealant as well. Only the super light non tubeless tires without a thick bead were unable to be run tubeless on the Havens.

The Good:

When considering a trail or AM wheelset, I want it to be very stiff, tubeless compatible, roll smooth, and have a wide rim to offer the best footprint out of my tires. The Havens are definitely one of the most laterally stiff wheelsets I have have run, and there is a noticeable difference in how a bike performs with and without Havens installed. The tubeless set up is great, as it held pressure and never seemed to leak. The rims seem to be incredibly durable with 0 dents or flatspots, and with a weight of 1647g for the pair, you can’t help but like these wheels.


The Not So Good:

While there are a lot of different wheel options out there, I still feel that the Havens are one of the best. However, issues with the rear hub seems to be a common theme. On the first generation, variances with the thickness of an o-ring in the preload adjuster led to noticeable play that couldn’t be adjusted out. Easton’s top notch wheel support was extremely helpful in taking care of the situation though, and it has since been remedied. On the newest generation the issue seems to be that the rear hub just refuses to stay tight. I’ve only run the new set of Havens set up as 142 x 12, and usually after 1 or 2 rides I have to re-tighten the rear hub. It seems that it’s not just me either, I’ve had friends mention that their rear Haven (also 142 x 12) won’t stay tight, and seems that Pinkbike is experiencing similar issues with their Carbon Havens. I also had to replace bearings in the rear hub much sooner that I would have liked, but to be fair they did see some fairly wet conditions.

The silver lining in all of this, is that even with the fact that I have to adjust the rear hub fairly frequently, it hasn’t kept me off the Havens. Fortunately, the process of adjusting the hub is incredibly easy and simply requires a 20mm cone wrench to turn the adjustment collar while the wheel is in the bike. If it was an involved process of removing the wheel, etc, it would change my mind, but as it stands I don’t mind having to adjust it from time to time. I’m hoping that as with a few of Easton’s road wheels, a new adjuster will be developed and will remedy the slight issue in the future.

There are simply too many good things about the Havens to give them a low score just because of the loose hub. I’m hoping that it’s not a widespread issue, but as stated at least it’s easy to address. Due to the fact that the Havens are very light, very stiff, adaptable, and only retail for $945, they are still a good buy in my book. Address the issues with the rear hub and you will have a perfect wheelset.

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

13 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Steve
12 years ago

In other words…the rear hub sucks.

Travis
Travis
12 years ago

Rear Hub computability might be OK but front hub computability is terrible. Not being able to jump between a 15mm to 20mm does not make sense in a wheelset like this.

Furious George
Furious George
12 years ago

I wouldn’t say the rear hub sucks, it just takes a little love like a Chris King does. Initially I was frustrated with the rear hub coming lose, but the fix is simple and you don’t have to take the wheel off the bike. After about 9 or so times making a very slight tightening of the preload bolt it doesn’t come loose any longer-even after tearing the hub apart to clean and lube. And that’s where the rear hub is super sweet: a couple of allen wrenches and you have the thing completely apart. No expensive, fancy tools like I’ve had to use on the King’s and DT Swiss EX1750’s.
Now, I just wish I had the newer, convertable rear hub…

Will
Will
12 years ago

I have the first gen, and so far no issues with loose hubs. Tubeless was super easy, I mounted up tires with a crappy Giant floor pump.

I do wish they came with removable core valvestems.

But seeing as I bought mine for $500 (barely used), freaking fantastic wheels.

Veda
Veda
12 years ago

It’s ok at its MSRP, but at the street prices where Easton wheels are known to be massively discounted (often up to 40%), they become THE wheels to buy if you want the almost top of the line performance for so little penny. The fact they they look pretty is a bonus too.

Bod
Bod
12 years ago

Huh? I’ve got Kings and while they’re not perfect I don’t have to touch them except for their twice yearly service. No special tools needed for basic servicing, just two 5mm allen keys, if you want to change bearings (which I’ve not had to do after 30,000 miles) you need the tool. 20mm cone spanners aren’t particularly common.
I don’t see how a wheelset that requires regular adjusting could been seen as anything other than a bit rubbish

wigs
wigs
12 years ago

The rear hub blows. shouldn’t garner more than 2 thumbs up.

Skronglite
12 years ago

The only experience I’ve had with Easton wheels is bearings wearing out prematurely. They don’t spec weird bearings, so I don’t know why they don’t hold up…

Dan
Dan
12 years ago

I broke a spoke on a rear wheel. Colorado Cyclist where i bought them said it has to be sent back to easton for replacement. I heard Easton takes forever.

hei
hei
11 years ago

My 2011heaven’s hub is m1-20 with 10x135qr,could I change axis shell to12x142?

Mike
Mike
10 years ago

10 rides and I broke a drive side spoke. So I will need a new rear wheel while Easton repairs this one. The other thing does any-one have the trouble I’m having breaking the bead to remove the tire. I was able to get a rocket ron off with pliers. But I can`t get the Hansdampf off at all.So I will send the wheel back with a tire on it.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.