Home > Bike Types > Road Bike

The Making Of The New Independent Fabrication/aarn_wrks_dsn “Iftop” Integrated Seatmast Clamp

1 Comment
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More


Shortly after writing Sunday’s post about the new Independent Fabrication Titanium Factory Lightweight, I stumbled upon the above image over on the Mega Bottle Ride blog. (Georges at MBR has a nose for aesthetic brilliance in the realm of bicycles.) And although it might seem we’re bombarding you with If-related news here at Bike Rumor, I couldn’t help but follow up with some additional intel about one of the most exciting features of the bike: the Iftop integrated seat mast clamp. The item was designed in collaboration with Aaron Panone of  aarn_wrks-dsn. You may recall a highly produced promo video for the Union Foundry T-0001 Roto-Fix Tool making the rounds a few months back — that was aarn_wrks-dsn’s work as well.

Apparently the striking orange and black “Hemi-Orange” bike pictured in my previous post is referred to as the “V2.” And apparently I wasn’t quick enough to figure out that, where there’s a V2, there’s almost always a V1. The raw Ti and carbon V1, a bike described both as a “super-secret race bike” and a  “space age muscle car” was actually unveiled at the Boston Handbuilt Bicycle Show in September, but I was all the way across the river in Somerville, so I didn’t hear anything about it.

Pics of the clamp, the design process, and the V1 after the break…


Unlike many seat-mast clamps, especially those involving carbon fiber, the Iftop clamp bolts are meant to be torqued to 10NM; not the paltry 4 or 5 NM of a normal post.

Some of Aaron Panone’s inspired design doodlings. For more information on the design process, check out his blog post about this project.


The raw, unfinished clamp pieces, pre-crown…waiting to get all sexy.

Hi. That’s right, I saw you checkin’ me out.

And this would be the only photo I could scrounge up of the aforementioned V1.

Above: The finished product.

Below: videos of this majestic part being machined on the 8-axis Nakmura-Tome MMY turning center

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

1 Comment
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
adam
adam
13 years ago

I want the same thing but in a BIG belt buckle!

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.