Home > Clothing-Gear-Tools

Niner Carbon Fork Still Rideable After Being Smashed With Hammer

7 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

niner-carbon-fork-hammered

You may recall the video where Niner Bikes co-founder Chris Sugai smashed their new carbon fork with a hammer. A few people posted comments about what the inside of the fork may look like, and Niner said that while it was structurally sound, it should be replaced if such damage occured. The point of the test was to show that even massive hits to the fork wouldn’t result in catastrophic, rider-flying-off-a-cliff, certain death failure. Well, it seems Niner wanted to see if the fork was rideable afterall, so they tested it. Here’s the results:

After abusing a carbon Niner fork with a ball peen hammer, we sent the very same component off to our testing facility and sent it through the same rigorous tests that our brand new forks undergo.

Niner forks are tested to the new European standards specifically designed for mountain bike use. To pass these safety standards the fork must undergo a load of 650 Newtons, both pushing and pulling on the dropouts for one hundred thousand cycles. Our hammer fork passed this test easily, so we kept going… and we upped the load. At 750 Newtons, the hammer fork passed another hundred thousand cycles, so we kept at it… and at it… In the end we were not able to get this fork to break until after three hundred thousand cycles! The Niner carbon fork tripled the most stringent bike product safety standard out there, after being beaten with a hammer! We would prefer that you didn’t do this to your fork, but it is nice to know how tough these things really are.

Also, they’ve updated their demo shop list, so if you’re looking for a local shop that has demo bikes in stock, hit ‘more’ to see the current list.  Oh, and you’ll see their sweet Niner Sigg water bottle…

niner-bikes-sigg-water-bottle

These bottles are tough, reusable and just look damn cool. Made of aluminum (with Sigg’s new BPA-free EcoCare liner), they will resist any beverage you put into them and last for years. Sigg manufactures to high ecological standards and is 100% recycleable.  We grabbed one from Interbike (thanks, Chris!!!) and they’re pretty sweet.

DEMO SHOPS:

Find a Niner mountain bike to demo at one of these shops…check their list online to see what models each of these shops has in stock to test ride:

Pure Cycle, Calgary AB
Oak Bay Bicycles, Victoria BC
Big Kahuna Bicycles.com, Littleton CO
Colorado Cyclist, Colorado Springs CO
Cycles of Life, Leadville CO
Golden Bike Shop, Golden CO
Rapidcreek Cycles, Palisade CO
The Bike Shop – Grand Junction, Grand Junction CO
Central Wheel, Farmington CT
Higher Ground Bicycle Company, Tallahassee FL
Addictive Cycles, Flowery Branch GA
Alpha Bikes, Alpharetta GA
Bear Creek Bicycle Company, Dalton GA
Outspokin Bikes, Woodstock GA
Meridian Cycles, Meridian ID
Nebo Ridge Bicycles, Carmel IN
Alger Cyclery, Grand Rapids MI
Custer Cyclery, Augusta MI
Missoula Bicycle Works, Missoula MT
Liberty Bicycles, Asheville NC
Middle Ring Cycles, Albemarle NC
Revolution Cycles/Friendly Bike, Greensboro NC
The Cycle Path, Cornelius NC
Town Cycle, West Milford NJ
Dark Horse Cycles, Montgomery NY
918XC, Tulsa OK
Providence Bicycle, Providence RI
Bicycle Sport Shop, Austin TX
Cole Sport, Park City UT
Just The Right Gear, Salem VA
Bike 29, Waterbury VT

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

7 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Paul
Paul
14 years ago

I think this test would have been much better if they had beaten a fork that had a hub in the dropouts. Without that bracing effect, the fork leg will flex and vibrate when you hit it with a hammer. If there was a hub in the dropouts, then the hammer would have more leverage and the test would better simulate a crash.
Still, it’s a pretty cool test video and I’m amazed that the all-carbon forks could withstand such abuse, brand-new or not.

Colin Godby
Colin Godby
14 years ago

Following the testing press-release, a second press release was issued announcing the new 100gram lighter fork for 2010 🙂 ….

Eddie Jones
Eddie Jones
14 years ago

Is there a typo here? Three hundred thousand cycles, very impressive.
750 Newtons? It this correct? Isn’t that 15 lbs? I’m not impressed with 15 pounds of pulling force, even for a million cycles. Can anyone clarify?

Steve
14 years ago

Actually, the correct conversion from Newtons to lbs is 750 Newtons = 168 lbs. The fork is in a test jig that simulates a fixed head tube with a standard headset installed and the drop outs are pushed AND pulled with this amount of force for that many cycles. I hope this helps.

Eddie Jones
Eddie Jones
14 years ago

Thanks Steve for the help there. My apologizes to all.

Raskladnoy
Raskladnoy
14 years ago

Paul, it actually did have a hub installed during the hummer test. watch the video.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.